These Quest 3 gun controller grips are a pair of pistol-shaped covers that clip over the Meta Quest 3 and Quest 3S Touch Plus controllers. They give VR shooters a proper trigger-and-grip hand pose, add drop protection, and leave every tracking sensor exposed so aim stays accurate. Controllers are not included.

Why use gun-shaped grips

A real rifle hand pose

The shell is moulded to the shape of a real firearm grip, so your hand sits where it would on an actual weapon. In FPS games this makes aiming down sights and quick target changes feel natural instead of holding a bare controller.

Tracking stays clear

The covers are cut around the Quest 3 tracking ring, so the headset never loses the controller. A rope hole at the base of each grip takes a wrist strap to keep the controller safe during fast movement.

Everyday protection

Made of durable plastic, the grips shield the controllers from knocks, scratches and sweat during daily play, and wipe clean.

Specifications

What's in the box

• 1 x pair of gun-shaped controller grips (left and right)

Quest 3 gun grips FAQ

Is this a full shoulder stock? No. These are hand grips shaped like a pistol. For a shoulder-mounted rifle, see our VR gun stocks.

Does it fit the Quest 3S? Yes. It fits both the Meta Quest 3 and the Quest 3S controllers.

Are controllers included? No. You fit these over your own Touch Plus controllers.

Which games work best? Any VR FPS, such as Arizona Sunshine, Contractors, Resident Evil 4 VR and Superhot VR.

These grips are part of the VR gun stock range at Metanexus XR. For non-gun grips, see our VR controller grips and covers.

The Vanguard is a quick-adjust VR gun stock with swappable controller cups: it locks both motion controllers onto one rifle frame for steady aim, changes length with no tools, and moves to another headset by swapping the cups. It fits Meta Quest 2, Quest 3, Quest 3S, Quest Pro and PS VR2, in an Ebony Black or Wraith Grey finish.

A tool-less VR gun stock

Most rifle stocks need a screw or a clip to change the length of pull. The Vanguard uses a quick-adjust catch you work by hand, so you can tune the fit between rounds.

Swappable controller cups

Each headset has its own moulded cup set that holds the controllers firmly. To use the stock with a different headset, swap the cups — the frame is the same.

Two-hand hold

A front grip and rear stock put both hands on the weapon so recoil and sway feel anchored, which is what makes a VR gun stock for Quest 3 or PS VR2 worth using in the first place.

Ebony or Wraith

Ebony Black is the classic dark finish; Wraith Grey is a lighter gunmetal tone. Both are the same frame and cups.

Specifications

Headset compatibility

Choose your headset at checkout so the right cups ship with the frame.

• Meta Quest 3 / Quest 3S — Touch Plus controllers.
• Meta Quest 2 — Touch controllers.
• Meta Quest Pro — Touch Pro controllers.
• PlayStation VR2 — Sense controllers.

What's in the box

• Vanguard frame in your chosen finish
• Swappable controller cups for your headset
• Quick-adjust components and assembly hardware

FAQ

Do I need tools to change the length? No. The quick-adjust catch is worked by hand.

Can I use it with more than one headset? Yes, by buying the cup set for the second headset. The frame does not change.

Is Valve Index supported? Not on this model — choose Quest 2/3/3S/Pro or PS VR2. For an Index-ready frame see the other stocks in the collection.

Ebony or Wraith — any performance difference? None. It is only the colour.

Compare the full range in VR Gun Stocks & Rifle Frames, or see VR Controller Grips for lighter add-ons.

The Smoke Grey edition of the SPINE stock is a magnetic VR gun stock in a muted gunmetal-grey finish. Both motion controllers sit on magnetic mounts on one telescoping frame, so your aim holds steady and you can pull a controller off in a fraction of a second for a reload or a grenade. The grey finish stays low-key on stream and under arena lighting. It fits Quest 3, Quest 3S, Quest 2, Quest Pro, Quest 1 / Rift S, Valve Index and PS VR2.

Magnetic SPINE frame

The SPINE frame carries both controllers on a rigid spine with a front grip and a rear stock. Recoil and sway feel anchored, the way a real rifle would.

Magnetic quick-release

Each controller drops onto a magnet cradle and lifts straight off — no clip to fight mid-match.

Telescoping length

Three body lengths (24", 26", 28") cover players from about 5´2 to 6´4; the stock then locks at your length of pull.

The smoke-grey finish

This edition is finished in a matte smoke grey — darker than a raw PLA grey, lighter than black. It hides scuffs well and does not throw glare on camera. Mechanically it is identical to the other SPINE editions.

Specifications

Headset compatibility

Pick your body length and headset at checkout — the magnetic cradles are matched to that controller pair.

• Quest 3 / Quest 3S — Touch Plus controllers.
• Quest 2 — Touch controllers.
• Quest Pro — Touch Pro controllers.
• Quest 1 / Rift S — first-gen Touch.
• Valve Index / PS VR2 — Index / Sense controllers.

What's in the box

• SPINE frame in smoke grey, in your chosen length
• Magnetic controller cradles for your headset
• Front grip, rear stock and assembly hardware

FAQ

Is the smoke-grey version any different to use? No — it is the SPINE frame in a different colour.

Do the controllers hold through recoil? Yes; the magnets are sized to hold through fast movement and release on a deliberate pull.

Which length should I pick? 24" for ~5´2–5´9, 26" for ~5´8–6´2, 28" for ~6´0–6´4.

See every finish and frame in VR Gun Stocks & Rifle Frames, or add VR Controller Grips.

The Tactical VR gun stock mounts both motion controllers on one lightweight frame so your aim stops drifting, your reloads get faster and you keep full tactical mobility. Swappable controller mounts mean it works across headsets — Valve Index, Meta Quest, PS VR2 and more — and you only re-buy the mounts if you change headset.

Swift aim, rapid reload

The streamlined 30 cm frame positions your controllers for a stable hold, whether you aim down sights or hip-fire, while your free hand stays mobile for ladders, grenades and secondary actions. Bottom-mounted controller cradles keep the tracking signal between headset and controllers crystal clear.

Detach to reload, attach to keep fragging

Pull the front or rear hand off to reload, throw or grab something, click it back and continue. Target-acquisition speed goes up, and so does your score. A lightweight frame means you can respond before your opponents do. It is simple to learn and quick to calibrate, and every session builds the muscle memory for a flawless shot.

Expandable and future-ready

Add a detachable shoulder stock to shoulder it for longer-range shots — ideal for machine-pistol and SMG play. Get a new VR headset later and you only buy new controller mounts, not the whole rig.

Built for these VR shooters

Competitive: Ghosts of Tabor, Onward, Pavlov, Tactical Assault VR, Alvo, Breachers, Contractors & Showdown, Population: One.
Co-op: Arizona Sunshine 1 & 2, Crisis Brigade 2 Reloaded, Crossfire Sierra Squad, Surv1v3.
Single-player: Into the Radius, Sniper Elite & Winter Warrior, The Light Brigade, The Walking Dead Saints & Sinners 1 & 2.
Target practice: Clay Hunt VR, H3VR, GUNS, Gun Club VR.

What's in the box

• 1 x Tactical gun stock frame (30 cm tube): one notched bracket for the rear-hand controller, one smooth bracket for the front-hand controller
• 1 x pair of left and right controller mounts with magnets and a black rubber inner layer to protect the controllers
• 1 x M3x20 bolt to fix the rear mount to the rear bracket
• Tool bag: 2.5 mm, 3 mm and 4 mm Allen keys

With the optional Shoulder Extension you also get a shoulder stock on a tube, a 20 cm extension tube with a sling ring, a one-point sling, and — for the haptic version — a USB-C charging cable and a Bluetooth dongle for PCVR.

Tactical VR gun stock FAQ

Which headsets does it fit? It is modular: the frame is universal and the controller mounts are headset-specific. Valve Index, Meta Quest and PS VR2 mounts are available, so changing headset means new mounts, not a new frame.

Do the controllers detach quickly? Yes. The mounts are magnetic, so you can pull a hand off to reload or throw and click it back without looking.

Does it block controller tracking? No. The cradles sit at the bottom of the controllers and leave the tracking clear.

Can I shoulder it? Not on its own — add the Shoulder Extension for a proper shouldered stance and longer-range shots.

This gun stock is part of the VR gun stock range at Metanexus XR.

The Tan (Sandman) edition of the SPINE stock is a magnetic VR gun stock in a flat desert-tan finish for players who want a milsim look. Both controllers sit on magnetic mounts on one telescoping frame; the two-hand hold steadies your aim and either controller pops off instantly for a reload or a nade. The tan colour reads as coyote / FDE next to plate carriers and tan headset shells. Fits Quest 3, Quest 3S, Quest 2, Quest Pro, Quest 1 / Rift S, Valve Index and PS VR2.

Magnetic SPINE frame

The SPINE spine holds a front grip and rear stock, with both controllers clamped on magnetically for an anchored two-hand hold.

Magnetic hot-swap

Lift a controller off the magnet for reloads, grenades or menus and click it back — no tools, no clips.

Telescoping stock

Three body lengths (24", 26", 28") and a locking buttstock set the length of pull to your build.

The desert-tan finish

A flat, low-sheen tan across the frame — the closest the range gets to a coyote / FDE milsim colour. It pairs with tan gear on camera and hides dust. Mechanically it is the same SPINE frame as the black and grey editions.

Specifications

Headset compatibility

Choose body length and headset at checkout — the magnetic cradles are matched to that controller pair.

• Quest 3 / Quest 3S — Touch Plus controllers.
• Quest 2 — Touch controllers.
• Quest Pro — Touch Pro controllers.
• Quest 1 / Rift S — first-gen Touch.
• Valve Index / PS VR2 — Index / Sense controllers.

What's in the box

• SPINE frame in desert tan, in your chosen length
• Magnetic controller cradles for your headset
• Front grip, rear stock and assembly hardware

FAQ

Is the tan a true FDE colour? It reads as a coyote / FDE tan on camera; exact shade varies slightly by batch.

Same performance as the other editions? Yes — identical SPINE frame and magnetic mounts.

Which length? 24" for ~5´2–5´9, 26" for ~5´8–6´2, 28" for ~6´0–6´4.

See every finish in VR Gun Stocks & Rifle Frames, or add VR Controller Grips.