M8 lock washers: overview

These M8 lock washers keep bolts tight on aluminium profile sim rigs. They apply tension between the fastener and the mounting surface, so bolts stay put under force feedback, bass shakers, motion and frequent adjustments.

Use them on brackets, accessories and structural parts that you want to stay secure.

Set of 10, high-strength steel.

Who the M8 lock washers is for

Rig owners who want fixings to stay tight:

• Rigs with direct drive, shakers or motion
• Builders assembling brackets and accessories

Features in detail

Anti-loosening design

Resists vibration loosening.

High-strength steel

Durable for repeated use.

M8 size

Matches the standard M8 fixings on 8 mm slot profile.

Compatibility

For M8 bolts on our NexusRig aluminium cockpits, monitor stands and accessories, and any M8 fixings.

Mounting on aluminium profile rigs

The 8 mm slot standard. Most modern sim rigs use 40 mm-based aluminium extrusion (40x40, 40x80, 40x160) with 8 mm slots. Mounts fix with M8 bolts and T-nuts that slide into the slot, so they can be moved and re-angled at any time.

Rigidity and access. Mount heavy or high-force devices (handbrakes, shifters, wheel bases) as close to a vertical upright or cross member as possible. Leave room to get in and out of the seat.

Tools. A set of hex keys (mainly 6 mm for M8) covers nearly every mount. Snug every bolt, test, then do a final tightening once the position is right.

Setup and use

1. Place the lock washer under the bolt head (or nut).
2. Tighten the bolt as normal.

Care and maintenance

Replace lock washers that have been flattened after repeated use.

Specifications

What's in the box

• 10 x M8 lock washers

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Do I need these?

They help on fixings that loosen with vibration, such as mounts on rigs with shakers or motion.

Are bolts included?

No, washers only.

How many in the set?

Ten.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See all our sim rig spare parts, or browse the complete sim racing range to build your rig.

M8 x 20 mm hex screws: overview

This set of 20 M8 hex screws, 20 mm long, is the standard fixing used across aluminium profile sim rigs and monitor stands with 8 mm slots.

Keep a spare set for adding brackets and accessories, replacing lost screws, or reconfiguring your rig.

Use them with M8 T-nuts in the profile slot and a 6 mm hex key.

Who the M8 x 20 mm hex screws is for

Anyone maintaining or expanding a profile rig:

• Owners of NexusRig aluminium cockpits
• DIY rig builders

Features in detail

M8 x 20 mm

The common length for brackets on 8 mm slot extrusion.

Hex socket

Tightens with a standard 6 mm hex key.

Set of 20

Plenty for several accessories.

Compatibility

For 8 mm slot aluminium extrusion with M8 T-nuts, as used on our NexusRig aluminium cockpits and monitor stands.

Mounting on aluminium profile rigs

The 8 mm slot standard. Most modern sim rigs use 40 mm-based aluminium extrusion (40x40, 40x80, 40x160) with 8 mm slots. Mounts fix with M8 bolts and T-nuts that slide into the slot, so they can be moved and re-angled at any time.

Rigidity and access. Mount heavy or high-force devices (handbrakes, shifters, wheel bases) as close to a vertical upright or cross member as possible. Leave room to get in and out of the seat.

Tools. A set of hex keys (mainly 6 mm for M8) covers nearly every mount. Snug every bolt, test, then do a final tightening once the position is right.

Setup and use

1. Slide an M8 T-nut into the slot.
2. Fit your bracket and tighten the screw with a 6 mm hex key.

Care and maintenance

Do not over-tighten into aluminium. Re-check after the first sessions.

Specifications

What's in the box

• 20 x M8 x 20 mm hex screws

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Are T-nuts included?

No, screws only; T-nuts are sold separately in our spare parts.

What tool do I need?

A 6 mm hex key.

Will they fit my rig?

Any 8 mm slot profile rig using M8 fixings.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See all our sim rig spare parts, or browse the complete sim racing range to build your rig.

40x40 mm extrusion end caps: overview

These ABS 40x40 end caps close the open ends of 40x40 mm aluminium extrusion with 8 mm slots, giving your sim rig or monitor stand a clean, finished look.

They also cover sharp cut edges, protect your floor, shins and furniture, and stop dust collecting inside the profile.

Supplied as a pack of two.

Who the 40x40 mm extrusion end caps is for

Owners and builders of aluminium profile rigs:

• Anyone who has lost or broken an end cap
• DIY rig builders finishing their build

Features in detail

40x40 mm fit

Sized for 40x40 mm extrusion with 8 mm slots.

ABS plastic

Durable and push-fit.

Safer, cleaner ends

Covers sharp edges and keeps dust out.

Compatibility

Fits 40x40 mm aluminium extrusion with 8 mm slots, as used on our NexusRig aluminium cockpits and monitor stands.

Mounting on aluminium profile rigs

The 8 mm slot standard. Most modern sim rigs use 40 mm-based aluminium extrusion (40x40, 40x80, 40x160) with 8 mm slots. Mounts fix with M8 bolts and T-nuts that slide into the slot, so they can be moved and re-angled at any time.

Rigidity and access. Mount heavy or high-force devices (handbrakes, shifters, wheel bases) as close to a vertical upright or cross member as possible. Leave room to get in and out of the seat.

Tools. A set of hex keys (mainly 6 mm for M8) covers nearly every mount. Snug every bolt, test, then do a final tightening once the position is right.

Setup and use

1. Clean the profile end.
2. Line the cap up with the slots and press it in firmly.

Care and maintenance

Wipe clean with a damp cloth.

Specifications

What's in the box

• 2 x 40x40 mm ABS end caps

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Will they fit 80x40 profile?

No, these are for 40x40 profile; 80x40 caps are sold separately.

How do they attach?

They press into the profile end.

How many in a pack?

Two.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See all our sim rig spare parts, or browse the complete sim racing range to build your rig.

40x80 mm aluminium profile set: overview

This set of two 40x80 aluminium profiles gives you 600 mm lengths of black anodised extrusion with standard 8 mm slots – the same building block used by most aluminium sim racing and flight simulator rigs.

Use them to add a cross member, extend an upright, build a side support for a shifter or handbrake, or replace a damaged section of your rig.

The 8 mm slot takes standard M8 T-nuts and bolts, so all the usual brackets and mounts fit.

Who the 40x80 mm aluminium profile set is for

Rig builders and tinkerers:

• Owners of aluminium profile cockpits who want to add mounts
• DIY sim rig builders
• Anyone repairing or modifying an extrusion rig

Features in detail

40x80 mm section

A stiff section that matches the uprights and cross members on many profile rigs.

600 mm length

A practical length for cross members, side supports and short uprights.

8 mm slots

Standard 8 mm slots take M8 T-nuts and the common brackets used across sim racing.

Black anodised

Hard-wearing black anodising matches black rigs and resists corrosion.

Set of 2

Two identical lengths, handy for symmetrical builds.

Compatibility

Fits any 40-series aluminium profile system with 8 mm slots, including our NexusRig aluminium cockpits (Rookie, Sprint, Vanguard, Titan, Fortress, Formula Hybrid, NexusHaul).

Brackets, T-nuts and bolts are not included; see our spare parts.

Mounting on aluminium profile rigs

The 8 mm slot standard. Most modern sim rigs use 40 mm-based aluminium extrusion (40x40, 40x80, 40x160) with 8 mm slots. Mounts fix with M8 bolts and T-nuts that slide into the slot, so they can be moved and re-angled at any time.

Rigidity and access. Mount heavy or high-force devices (handbrakes, shifters, wheel bases) as close to a vertical upright or cross member as possible. Leave room to get in and out of the seat.

Tools. A set of hex keys (mainly 6 mm for M8) covers nearly every mount. Snug every bolt, test, then do a final tightening once the position is right.

Setup and use

1. Plan the position and choose suitable corner brackets.
2. Slide M8 T-nuts into the slots before closing off the ends.
3. Bolt the profiles to your rig with corner brackets, square them up and tighten.
4. Fit end caps for a finished look.

Care and maintenance

Wipe with a damp cloth. Keep the slots free of debris so T-nuts slide easily.

Specifications

What's in the box

• 2 x 40x80 mm aluminium profiles, 600 mm, black anodised

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Are brackets and bolts included?

No, this is the profiles only.

Will it fit my rig?

If your rig uses 40-series extrusion with 8 mm slots, yes.

Can I cut it?

Yes, aluminium extrusion can be cut with a suitable saw; deburr the cut ends.

What end caps fit?

80 x 40 mm end caps, available in our spare parts.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See all our sim rig spare parts, or browse the complete sim racing range to build your rig.

NexusMount direct drive front-mount plate: overview

This direct drive wheel mount plate is the plate-only part of our NexusMount system. It bolts between the NexusMount side mounts and front-mounts a direct drive wheel base, so the motor sits face-on to you with nothing in the way and no flex under full torque.

The idea behind NexusMount is simple: when you change wheel base, you only change the plate, not the whole cockpit. The base structure is thick-walled extruded aluminium and this plate is machined from high-grade aluminium, 15 mm thick, then anodised.

Please note that this listing is the plate only. It needs the NexusMount base kit (included in our NexusMount front-mount wheel kit) or a NexusRig Velocity cockpit, which already has the side mounts.

Who the nexusMount direct drive front-mount plate is for

Drivers with a front-mount direct drive wheel base:

• Owners of a NexusMount base kit who are changing wheel base
• NexusRig Velocity owners moving to a front-mounted base
• Builders of aluminium profile and DIY rigs who want a stiff, future-proof wheel mount

Features in detail

15 mm thick aluminium

At 15 mm the plate is extremely rigid, with no weak points, so the wheel base cannot twist the mount under heavy force feedback.

Front-mount layout

Front mounting bolts the base by its face, which is the stiffest way to hold a direct drive motor and leaves clean space under the base for cables.

Part of a modular system

The NexusMount system lets you swap only the plate when you change wheel base, keeping your side mounts, positions and cockpit unchanged.

Quick adjustment

Once fitted to the side mounts (supplied with the base kit and with the NexusRig Velocity), the plate is quick to reposition precisely.

Hardware included

All the hardware to fix the plate to the side mounts and the base is in the box.

Compatibility

Mounting system: requires the NexusMount base kit for aluminium profile rigs (total width 580 mm with the base kit) or a NexusRig Velocity cockpit. With the base kit it fits our aluminium profile rigs (NexusRig Fortress, Formula Hybrid, Titan, Vanguard, Sprint, Rookie, NexusHaul Truck Simulator), tube rigs (NexusRig Velocity, Velocity Carbon, GT Hybrid) and other DIY extrusion builds.

Wheel bases (front mount): Simucube 3 Sport, Pro and Ultimate; Simucube 2 Sport, Pro and Ultimate; Simagic Alpha Mini, Alpha and Alpha Ultimate; VNM Direct Drive Elite, Premier, Supreme and Xtreme; VRS DirectForce Pro 15 Nm and 20 Nm; Immsource ET3 and ET5; Leo Bodnar SimSteering 2; Sim-Lab DDX26 and DDX39 TorqueSync; SimXperience AccuForce Pro V2.

If your base is not listed, email us its model and we will confirm the fit.

Building a sim racing or flight setup

Base, rim and pedals. In a modular setup the wheel base holds the force feedback motor, the rim clips on with a quick release and the pedals connect to the base or by USB. Rims and pedals must suit your base, and the base decides which platforms are supported.

Direct drive. Direct drive bases attach the rim straight to the motor for the most detailed and strongest feedback. They need a rigid cockpit or a strong desk mount.

Load cell pedals. A load cell brake measures pressure, not travel, like a real car. It is the single upgrade that improves lap-time consistency the most.

Setup and use

1. Make sure the NexusMount base kit (or your NexusRig Velocity side mounts) is installed.
2. Bolt the plate between the side mounts loosely.
3. Fix the wheel base to the plate through its front mounting holes.
4. Set the height, angle and reach, then tighten all bolts fully.
5. Re-check the bolts after the first sessions with high torque.

Care and maintenance

Direct drive bases put constant load through the mount, so check the bolts every few weeks. Wipe the anodised surface with a soft damp cloth; avoid abrasive pads.

Specifications

What's in the box

• 1 x direct drive front-mount plate (15 mm aluminium)
• Mounting hardware

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Large items such as cockpits, seats and monitor stands can ship in several boxes, customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return.

Warranty

Products bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Can I use this plate on its own?

No. It needs the NexusMount base kit or the side mounts of a NexusRig Velocity. If you have neither, choose the complete NexusMount front-mount wheel kit.

Which wheel bases does it front-mount?

Most popular front-mount direct drive bases. The full list of supported bases is in the compatibility section above; if yours is not there, email us its model.

Why is front mounting better?

It holds the motor by its face, which is the most rigid way to mount a direct drive base.

If I change wheel base later, what do I need?

Only a new plate for the new base; the side mounts and the rest of the NexusMount system stay.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See all our sim rig spare parts, or browse the complete sim racing range to build your rig.