Put your screen exactly where your eyes want it. The VTI-G2-12 is an ergonomic VESA monitor mount for a single display: it holds your screen on a fully adjustable desk arm, so you can set the height, tilt and viewing angle in seconds and reclaim the desk space that a standard monitor stand takes up.

This single monitor mount is built for people who spend the working day at a screen — a home office, a corporate workspace, or a gaming and simulation station. Where a fixed monitor stand keeps the display at one height, a proper monitor arm lets you match the screen to your posture whether you sit or stand, and frees the surface underneath for a keyboard, notes or a headset.

Key features

• Universal VESA fit: this VESA monitor mount is compatible with standard VESA mounting patterns — the 75×75 mm and 100×100 mm hole layouts used by most monitors — so the single monitor arm fits the screen you already own.
• Full ergonomic adjustment: dial in height, tilt and viewing angle on the adjustable monitor arm for a comfortable, neutral viewing position instead of hunching toward a screen that sits too low.
• Frees your desk: the display floats above the surface on the desk mount, leaving room for a keyboard, notes or a headset — the space-saving reason many people move from a monitor stand to a monitor arm.
• Built to last: robust construction in high-quality materials for daily professional use, at home or in the office.
• Straightforward setup: mounting hardware and installation instructions are included in the box.

Where it works

A single monitor arm suits a home office desk, a corporate workspace, a sit-stand or standing desk, and a gaming or simulation station — anywhere you want the screen at eye level without a bulky monitor stand. It works as a monitor mount for a home office where desk space is tight, and as a gaming monitor mount when you need the screen pulled forward and low for a headset or a racing wheel.

Monitor mount vs monitor stand

A monitor stand only lifts the screen by a fixed amount and still sits on the desk, using the surface underneath. A VESA monitor mount like the VTI-G2-12 moves the display through height, tilt and angle and clears the surface completely, so you can fine-tune the position through the day and keep the desk usable. If you are weighing a monitor arm vs a stand, the arm wins on adjustability and desk space; the stand is simpler but fixed.

Ergonomic setup tips

For a healthy ergonomic monitor position, set the top of the screen at or just below eye level, keep it about an arm's length away, and tilt it back by roughly 10–20 degrees. The height adjustable monitor arm makes it easy to reset that position when you switch between sitting and standing, or when someone else uses the desk.

What's in the box

• 1× VTI-G2-12 monitor mount
• Mounting hardware
• Installation instructions

Specifications

• Type: single-monitor VESA desk mount with an adjustable arm
• Mount style: desk-mounted monitor arm
• Compatibility: universal VESA mounting patterns (75×75 mm / 100×100 mm, used by most monitors)
• Capacity: single monitor
• Adjustment: height, tilt and viewing angle
• Construction: professional-grade, high-durability materials
• In the box: monitor mount, mounting hardware, installation instructions
• Model: VTI-G2-12

180° ball head for sensor tripods: overview

This ball head fixes a VR sensor on a tripod and aims it through 180°.

A 4 cm plate with 1/4" screw holds the sensor; the base has a 3/8" connection.

Lock the chosen position with the handle.

Who the 180° ball head for sensor tripods is for

Tripod-mounted base station setups needing robust aiming.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

180° aim

Range.

4 cm plate

Stable.

1/4" top, 3/8" base

Threads.

Lock handle

Secure.

Sturdy

Long-lasting.

Compatibility

Compatible with HTC VIVE and Oculus Rift sensors and tripods with a 3/8" screw.

How to choose the right VR accessory

Check the exact model first. Straps, docks, covers and batteries are shaped for one headset generation, so always compare the compatibility section with your exact headset or camera model before ordering.

Specialist brands. Many of the best VR and 360° accessories come from specialist makers rather than the headset manufacturer. They are designed to fit the listed devices and often add features the original lacks, but they do not change the headset's own warranty.

For shared and commercial use, prioritise wipeable surfaces, spare parts and charging solutions that let you rotate devices between sessions.

Setup and use

1. Screw onto the tripod.
2. Mount the sensor.
3. Aim and lock.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Base thread?

3/8".

Is this a genuine product?

Yes. It is a genuine Mantona product, designed for the devices listed under compatibility.

Which tripods?

Any with a 3/8" connection.

Which sensors?

HTC VIVE and Oculus Rift sensors.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Simple VR headset wall hook: overview

This VR headset wall hook gives your headset and cables a dedicated spot on the wall.

Easy to install, it holds the headset securely.

No more cables on the floor.

Who the simple vr headset wall hook is for

Anyone wanting simple, cheap storage.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups
• Quest owners

Features in detail

Wall hook

Simple.

Holds cables

Tidy.

Universal

All headsets.

Low cost

Budget.

Easy install

Quick.

Compatibility

Compatible with all VR headsets.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Mount on the wall.
2. Hang the headset by its strap.
3. Check that everything is fitted securely and works as expected before your next session.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Does it hold controllers?

It is designed for the headset and cables.

Is it easy to install?

Yes.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Aluminium VR headset wall mount: overview

This VR headset wall mount stores a headset and its controllers on the wall.

Aluminium makes it sturdy; it fits Oculus (Quest, Rift) and HTC (VIVE, VIVE Pro) models.

Screws and rubber pads are included.

Who the aluminium vr headset wall mount is for

Anyone wanting tidy wall storage.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups
• Quest owners

Features in detail

Aluminium

Sturdy.

Headset and controllers

Tidy.

Universal

All headsets.

Rubber pads

No scratches.

Screws included

Easy install.

Compatibility

Compatible with all VR headsets.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Mark and drill holes.
2. Screw the mount on.
3. Add rubber pads and hang the kit.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

What's in the box

• 1 × wall mount
• 2 × screws
• 4 × rubber pads
• 1 × sticker

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Is hardware included?

Yes.

Does it fit my headset?

It fits all VR headsets.

What is included?

Mount, 2 screws, 4 rubber pads and a sticker.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

1/4" tripod ball head: overview

This tripod ball head lets you aim a VR base station, sensor or tracking camera exactly where you need it. Its 1/4" socket screws onto any tripod or stand with a 1/4" screw, and its own 1/4" screw takes the sensor.

The multi-directional ball head gives precise positioning, which matters for tracking: base stations should look down across the play area at roughly 30–45°.

It is essential if you use tripods for your VR sensors and very handy if you move your setup regularly.

Who the 1/4" tripod ball head is for

Room-scale PC VR users, demo teams and arcades that set up base stations on tripods.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

1/4" in, 1/4" out

Mounts on standard tripods and takes standard sensors.

Multi-directional ball

Aim in any direction and lock.

Compact

Easy to pack with a portable VR kit.

Works with VIVE and Rift

Base stations and Rift sensors.

Quick repositioning

Adjust without removing the sensor.

Compatibility

Compatible with HTC VIVE base stations, Oculus Rift sensors and other devices with a 1/4" thread.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Screw the ball head onto the tripod.
2. Screw the base station or sensor onto the ball head.
3. Aim it at the centre of the play area and tighten the lock knob.
4. Run room setup.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

What's in the box

• 1 × 1/4" ball head

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

What thread does it use?

1/4" socket and 1/4" screw.

Will it fit my tripod?

Yes, any tripod with a 1/4" screw.

Which sensors?

HTC VIVE base stations and Oculus Rift sensors.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Oculus Rift wall mount kit: overview

This Oculus Rift wall mount kit organises the Rift headset and both Touch controllers.

It includes a headset mount, left and right Touch mounts and a screw and wall-plug kit.

Easy to install.

Who the oculus rift wall mount kit is for

Oculus Rift (CV1) owners wanting a dedicated storage spot.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

Headset mount

Rift.

Two Touch mounts

L and R.

Hardware

Screws and plugs.

Tidy

Wall storage.

Easy

Install.

Compatibility

Compatible with the Oculus Rift and Oculus Touch.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Drill and plug.
2. Screw the mounts.
3. Hang headset and controllers.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

What's in the box

• 1 × headset mount
• 1 × left Touch mount
• 1 × right Touch mount
• 1 × screw and wall-plug kit

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Is hardware included?

Yes.

Does it fit Rift S?

It is designed for the original Rift and Touch.

Are screws included?

Yes, with wall plugs.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Screw clamp with ball head: overview

This screw clamp fixes VR sensors to anything under 4.5 cm thick.

A 1/4" screw holds the sensor; the ball head aims it.

Quick install for mobile setups.

Who the screw clamp with ball head is for

Mobile installs on desks, shelves and door frames.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

Under 4.5 cm

Clamp range.

Hand-tightened

No tools.

Ball head

Aim.

1/4"

Sensors.

Portable

Mobile.

Compatibility

Compatible with HTC VIVE base stations and Oculus Rift sensors.

How to choose the right VR accessory

Check the exact model first. Straps, docks, covers and batteries are shaped for one headset generation, so always compare the compatibility section with your exact headset or camera model before ordering.

Specialist brands. Many of the best VR and 360° accessories come from specialist makers rather than the headset manufacturer. They are designed to fit the listed devices and often add features the original lacks, but they do not change the headset's own warranty.

For shared and commercial use, prioritise wipeable surfaces, spare parts and charging solutions that let you rotate devices between sessions.

Setup and use

1. Clamp on.
2. Screw sensor.
3. Aim.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Clamp range?

Under 4.5 cm.

Is this a genuine product?

Yes. It is a genuine Walimex product, designed for the devices listed under compatibility.

How thick can it clamp?

Up to 4.5 cm.

Which sensors?

VIVE base stations and Rift sensors.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Base station clamp mount: overview

This base station clamp mount places VR sensors and tracking cameras on shelves, tables or other rigid supports up to 4 cm thick.

A 1/4" screw holds the sensor, and a multi-directional ball head aims it precisely.

Perfect for quick installs and travel.

Who the base station clamp mount is for

Travelling demo teams and rooms where wall drilling is not allowed.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

Up to 4 cm clamp

Shelves and tables.

1/4" screw

Standard.

Ball head

Precise aim.

No drilling

Clamp on.

Portable

Travel-friendly.

Compatibility

Compatible with HTC VIVE base stations and Oculus Rift sensors.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Clamp to a rigid edge.
2. Screw on the sensor.
3. Aim and lock the ball head.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

How thick a shelf?

Up to 4 cm.

Do I need to drill?

No, it clamps on.

Which sensors?

HTC VIVE base stations and Oculus Rift sensors.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Base station clamp with ball head: overview

This clamp mount fixes HTC VIVE base stations and Oculus Rift sensors to shelves and edges.

An adjustable multi-directional ball head aims the sensor precisely.

Installation is fast, ideal if you move your setup regularly.

Who the base station clamp with ball head is for

Mobile setups and renters who cannot drill.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

Clamp

Quick fixing.

Ball head

Precise aim.

1/4" screw

Standard.

Portable

Move setups.

Simple

No tools.

Compatibility

Compatible with HTC VIVE base stations and Oculus Rift sensors.

How to choose the right VR accessory

Check the exact model first. Straps, docks, covers and batteries are shaped for one headset generation, so always compare the compatibility section with your exact headset or camera model before ordering.

Specialist brands. Many of the best VR and 360° accessories come from specialist makers rather than the headset manufacturer. They are designed to fit the listed devices and often add features the original lacks, but they do not change the headset's own warranty.

For shared and commercial use, prioritise wipeable surfaces, spare parts and charging solutions that let you rotate devices between sessions.

Setup and use

1. Clamp to an edge.
2. Screw on the sensor.
3. Aim and lock.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Thread?

1/4".

Is this a genuine product?

Yes. It is a genuine Hyperkin product, designed for the devices listed under compatibility.

Which sensors?

VIVE base stations and Rift sensors.

Do I need to drill?

No.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Articulated arm with clamp: overview

This articulated arm clamp mounts a VR sensor or base station up high, with two ball heads and a central locking joint.

A 1/4" screw on each end fixes the sensor and joins the arm to the hand clamp.

The clamp grips stands, shelves and rails, practical for events.

Who the articulated arm with clamp is for

Rooms where wall mounting is not possible.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

Double ball head

Flexible.

Central lock

Holds position.

1/4" ends

Standard.

Hand clamp

Grips supports.

Portable

Events.

Compatibility

Compatible with HTC VIVE base stations and Oculus Rift sensors.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Clamp to a support.
2. Screw on the sensor.
3. Position and lock.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

What is included?

Arm and hand clamp.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

Do I need to drill?

No, it clamps on.

Which sensors?

HTC VIVE and Oculus Rift sensors.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

18 cm magic arm: overview

This magic arm (Walimex Pro Swivel 18) mounts a VR sensor high and aims it any way.

Two ball heads and three joints lock with one wheel.

A 1/4" screw and shoe mount at each end; combine with a clamp.

Who the 18 cm magic arm is for

Custom sensor rigs on shelves, poles or clamps.

• PC VR gamers
• VR arcades and venues
• Developers and studios
• Training and simulation labs
• Home room-scale setups

Features in detail

18 cm

Reach.

Two ball heads

Flexible.

One-turn lock

Fast.

1/4" and shoe

Both ends.

Combinable

Clamps.

Compatibility

Compatible with HTC VIVE and Oculus Rift sensors.

How to choose the right VR accessory

Check the exact model first. Straps, docks, covers and batteries are shaped for one headset generation, so always compare the compatibility section with your exact headset or camera model before ordering.

Specialist brands. Many of the best VR and 360° accessories come from specialist makers rather than the headset manufacturer. They are designed to fit the listed devices and often add features the original lacks, but they do not change the headset's own warranty.

For shared and commercial use, prioritise wipeable surfaces, spare parts and charging solutions that let you rotate devices between sessions.

Setup and use

1. Attach to a clamp.
2. Mount the sensor.
3. Lock the wheel.

Care and maintenance

Tighten screws and clamps before each session, check for cracks or slipping, and never exceed the mount's load or clamp range.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Is a sensor included?

No.

Is this a genuine product?

Yes. It is a genuine Walimex product, designed for the devices listed under compatibility.

Is a clamp included?

No, combine it with a clip or clamp.

Which sensors?

HTC VIVE and Oculus Rift.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.

Quest 3 white display stand: overview

This white Quest 3 stand stores the headset safely and elegantly.

Designed to support the headset weight; it measures 258 × 235 × 55 mm.

It weighs 665 g for stability.

Who the quest 3 white display stand is for

Anyone who wants the headset on display rather than in a drawer.

• Meta Quest 3 owners
• Families sharing a headset
• Fitness and active VR players
• Long-session gamers
• VR arcades and events

Features in detail

665 g

Stable.

White

Clean.

Supports weight

Safe.

Compact

Desk.

Display

Show it off.

Compatibility

Compatible with the Meta Quest 3.

How to choose the right VR accessory

Check the exact headset model first. VR accessories are rarely universal: straps, facial interfaces, lens protectors and cases are shaped for one headset generation, so a Quest 2 part will not fit a Quest 3. The compatibility section above lists every headset the part is designed for.

Third-party vs original parts. This is a third-party accessory designed to fit the listed headsets; it is not made or endorsed by the headset manufacturer. Third-party parts often add features the original lacks (extra padding, built-in batteries, washable materials) at a lower price, but they do not change the headset's own warranty terms.

For shared and commercial use, choose wipeable PU-leather or silicone surfaces, keep spare facial interfaces, and use disposable hygiene masks or caps so each user gets a clean contact surface. For PC VR, confirm your PC's ports and cable routing before buying cables or cable-management systems.

Setup and use

1. Place on a desk.
2. Rest the headset.
3. Check that everything is fitted securely and works as expected before your next session.

Care and maintenance

Keep it clean and dry, store it away from direct sunlight and heat, and inspect it for wear before use. Wipe with a soft, dry microfibre cloth; do not use solvents.

Specifications

Shipping, returns and warranty

Shipping

Shipping is free on orders worldwide. Orders are prepared and dispatched within 1–3 business days and typically arrive within 4–8 business days in total, with tracking sent by email. Customs or public holidays can occasionally add a few days, and some items ship directly from our supplier.

Returns

You have 14 days from delivery to return the product for a refund, for any reason. It must be new, unused and in its original packaging with all accessories and documents. Contact us at metanexusxr@gmail.com with your order number to start the return. Consumables such as face cushions, foam pads or batteries showing wear cannot be refunded.

Warranty

Headsets and original accessories bought from our store are covered by a 2-year limited warranty against manufacturing defects. If anything goes wrong, email us your order number and a short description or photo and we will handle the claim with you.

Frequently asked questions

Does it charge?

No, it is a display stand.

Is this an official part?

No. It is a third-party accessory designed to fit the headsets listed under compatibility; it is not made by the headset manufacturer.

Which headset?

Meta Quest 3.

How long does delivery take?

Shipping is free worldwide. Orders are dispatched within 1–3 business days and usually arrive within 4–8 business days in total, with tracking by email.

Can I return it if it is not right for me?

Yes, within 14 days of delivery, as long as it is new, unused and in its original packaging. Email metanexusxr@gmail.com with your order number to start a return.

Is it covered by a warranty?

Yes, a 2-year limited warranty against manufacturing defects on products bought from our store.

See our other VR stands and mounts, or browse all VR accessories at Metanexus XR.