This Quest 2 Oxford-cloth case pairs a rigid shockproof EVA core with an Oxford-cloth fabric exterior, instead of leaving the EVA shell bare. The result is the same impact resistance as our plain EVA cases, with a woven textile surface that resists scuffs and shows wear less than smooth EVA.

Two materials, one shell

Underneath the fabric is the same dense EVA foam that gives our hard cases their crush resistance; the Oxford-cloth layer is the outermost surface you actually touch and see.

Why wrap EVA in fabric

Bare EVA can show scuff marks after repeated handling. A woven Oxford-cloth exterior hides light wear better and gives a more textile, less "plastic case" look and feel.

Specifications

What's in the box

• 1x EVA + Oxford-cloth shockproof case

Compatible headset: Oculus Quest 2 (headset not included).

FAQ

Is the protection different from the plain EVA cases? No - same EVA core; the difference is the fabric-covered exterior instead of bare EVA.

Does the fabric peel or fray over time? It's bonded to the shell as a permanent covering, not a removable sleeve.

Is it the same as the rainproof case? No - the rainproof EVA case is sealed against water; this Oxford-cloth exterior is not specifically weatherproofed.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

This Quest 2 Elite Strap case solves a real fit problem: a case sized for the standard Quest 2 strap is often too tight once you've upgraded to the Elite Strap, because the Elite Strap's rigid back band and battery pack take up more room. This case is cut with that extra clearance built in.

Room for the strap, not just the headset

The interior is shaped to hold the Quest 2 with the Elite Strap already attached, plus the controllers, without forcing the strap flat or leaving it outside the case.

Why standard cases run tight

Meta's Elite Strap adds a rigid rear band and, on the battery version, a battery pack behind the head - both add depth that a case designed only for the stock strap doesn't account for.

Specifications

What's in the box

• 1x Portable storage carrying case

Compatible headset: Oculus Quest 2 with Elite Strap (headset and strap not included).

FAQ

Will my standard-strap Quest 2 fit too? Yes - the extra clearance accommodates the standard strap as well as the Elite Strap.

Does it fit the Elite Strap with battery pack? Yes, that is specifically what the extra depth is for.

I don't have an Elite Strap - should I still buy this one? Any of our other Quest 2 cases, like the basic hard travel case, will fit a standard strap with less unused space.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

Overview

A complete Quest 2 protection set: a storage bag plus a face mask, lens protective cover and two silicone handle covers, so the headset and both controllers travel and store protected in one package.

What's in the box

• 1 x storage bag
• 1 x face mask
• 1 x lens protective cover
• 2 x silicone handle covers

FAQ

Does this cover the controllers too?
Yes – the two silicone handle covers protect both Touch controllers.

Is this compatible with the original Quest 2?
Yes, it's built for the Oculus Quest 2.

Looking for more options? Browse our full range of VR Headset Cases & Carrying Bags, part of our wider VR accessories collection.

This Pico 4 felt travel case is built specifically for the Pico 4 headset's shape - the only Pico-specific case in our carrying-case range - using a soft felt shell rather than the rigid EVA of our Quest and Vision Pro hard cases.

A soft shell shaped for the Pico 4

The felt shell wraps snugly around the Pico 4's specific headset and lens geometry, keeping dust and light scuffs off between sessions.

Why felt, not EVA

Felt is lighter and more compact than a rigid EVA shell, at the cost of less crush resistance - a good trade for shelf storage or a padded backpack pocket, less suited to checked luggage than our hard cases.

Specifications

What's in the box

• 1x Felt travel case

Compatible headset: Pico 4 (headset not included).

FAQ

Does this fit the Pico 4 Ultra? It is shaped for the standard Pico 4; check your headset's dimensions before ordering if you have the Ultra variant.

Is felt as protective as a hard case? It protects well against dust and scuffs, but a rigid EVA shell resists crushing better if you're checking it as luggage.

Does it hold the controllers too? Yes, there is room for both Pico 4 controllers alongside the headset.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

The BKANO Quest 2 shoulder-strap case is the pick for carrying the headset hands-free: a rigid hard box with both a top handle and a detachable shoulder strap, so it rides on your shoulder on the walk to a friend's house instead of taking up a hand.

A hard box built to be worn, not just held

The rigid BKANO shell protects the headset the same way our other hard cases do; what sets it apart is the strap hardware built into the design from the start.

Two ways to carry

• Top handle - grab-and-go for short trips.
• Shoulder strap - detachable, for hands-free carrying over longer distances.

Specifications

What's in the box

• 1x BKANO hard carrying box
• 1x Detachable shoulder strap

Compatible headset: Oculus Quest 2 (headset not included).

FAQ

Can I remove the strap and just use the handle? Yes - the strap detaches, leaving the built-in top handle.

Does it have the same organizer pockets as the BKANO organizer case? No - for dedicated cable/accessory compartments, see the BKANO organizer case; this one prioritises the carry strap instead.

Is the strap padded? It's a standard webbing strap, not a padded one.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

This is the basic hard travel case for Quest 2: a single rigid EVA compartment for the headset and its accessories, with none of the extra organizer pockets, rainproofing or shoulder strap of our other Quest 2 cases - just solid, affordable protection.

One compartment, done well

A rigid hard shell wraps a single open interior sized for the Quest 2 headset plus its controllers and cable loose inside - no dividers, no dedicated pockets.

Durable hard shell

Resists crushing and knocks the same way any hard case does.

Why keep it simple

Not everyone needs an organizer or a shoulder strap. If you just want the headset protected in a bag on a shelf or in a backpack, this is the lowest-cost hard case in our Quest 2 range.

Specifications

What's in the box

• 1x Hard travel case

Compatible headset: Oculus Quest 2 (headset and accessories not included).

FAQ

Does it have separate pockets for cables or batteries? No - this is a single open compartment. For dedicated pockets, see the BKANO organizer case.

Is it rainproof? Not specifically - for weatherproofing, see the rainproof EVA case.

Does it have a shoulder strap? No, just a top carry handle. For a shoulder strap, see the BKANO shoulder-strap case.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

The JYS JYS-APP001 grey-linen case is a soft fabric travel cover for Apple Vision Pro, built for keeping dust and light scuffs off the headset around the house or on short trips - a lighter, more understated alternative to a rigid hard case.

A soft cover, not a crush-proof case

This is a fabric storage bag rather than a foam-lined hard shell: it protects Vision Pro from dust, scuffs and light knocks on a shelf or in a padded bag pocket, but it will not survive being sat on or checked as luggage.

Grey linen exterior

A neutral, textile look that sits naturally on a desk or shelf rather than looking like electronics packaging.

Soft interior

The lining cushions the headset's glass front and light seal against scuffs during handling.

Why linen, not a hard shell

Vision Pro already ships with Apple's own protective cover for the light seal; this case is for the times you want to store or carry the whole headset discreetly, without adding the bulk and weight of a rigid EVA shell.

Specifications

What's in the box

• 1x JYS JYS-APP001 grey linen storage bag

Compatible headset: Apple Vision Pro (headset not included).

FAQ

Is this hard enough for checked luggage? No - it is a soft fabric cover for everyday handling and short trips, not a crush-proof shell. For rigid protection, look at the hard EVA cases in our Apple Vision Pro hardshell case.

Does it fit Vision Pro with the battery pack attached? Yes, there is room for the headset and its battery pack together.

Is the linen washable? Spot-clean only; it is not designed for machine washing.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.

This Quest 3 coral-fleece case pairs the crush resistance of an EVA shell with a soft fabric interior: the outside is dense shockproof EVA, but everything the headset actually touches - lenses, lens area and face pad - rests against a coral-fleece lining instead of bare foam.

Two layers, two jobs

The EVA outer shell handles drops and knocks the same way any hard case does. The coral-fleece inner layer has one job: keep anything abrasive away from the lens surfaces and face pad during transport.

EVA outer shell

Shockproof molded EVA resists crushing in a bag or under other gear.

Coral-fleece inner lining

A soft brushed-fleece layer sits between the shell and the headset, cutting down on micro-scratches from repeated packing and unpacking.

Why fleece against the lenses

Foam interiors are common in hard cases, but foam can leave fine marks on lens coatings over months of use. Fleece is the same idea as a lens cloth: soft fibre contact instead of foam-on-lens contact.

Specifications

What's in the box

• 1x EVA shell case with coral-fleece lining

Compatible headset: Meta Quest 3 (headset not included).

FAQ

Is this more protective than the plain EVA handbag case? Against drops, they are similar; this one is specifically better for lens surface care thanks to the fleece lining. See the EVA handbag case for the standard interior.

Does the fleece wear out? It is a fixed lining bonded to the shell, not a removable insert, so it lasts as long as the case.

Can I still fit the controllers in? Yes - the interior is shaped for the headset and both Touch Plus controllers.

Compare every option in VR Headset Cases & Carrying Bags, part of our VR Accessories range.